Voyager Dash Kit

  • Sale
  • Regular price $189.95

This CNC machined and anodized Dash for your 2023 Beta RR-S protects the Trail Tech Voyager and adds a location for a USB power outlet in addition to the stock warning lights and key assembly. An additional accessory mounting hole is provided to add a switch or RAM mount style 1" ball.

The installation kit for the 2023 bikes includes a bracket that replaces the stock mask mounting bracket and an additional billet machined mount that allows changes to the height of the dash assembly to suit your bar configuration using included spacers.

The Voyager is held in place with thumb screws and isolation mounts. Access to the SD Card slot is provided by removing the thumb screws and lifting the Voyager clear of the housing. Whilst in place the Voyager is a snug fit keeping the rubber slot cover pressed tightly in place.

The assembly can be raised or lowered by 6mm via the slots in the mounting bracket, and spacers are supplied for either stock or raised bars as required. Please note that the dash will not accommodate handlebar clamps on the forward position with forward offset. See chart for tested configurations. The Dash is a snug fit behind the headlight Mask. The installed height depends on your bar and spacer configuration. Lower mounting positions offer more protection but will tilt the headlight mask forward shortening the headlight range. Night road use may require small spacers to tilt the headlight back up.

Ear clamp pliers are recommended to remove and re-install the dash lights, they are available on Amazon for around $11 with free shipping...Your dealer will most likely have the tool as it's for a commonly used fuel line clip. Some customers have had success with needle nose pliers.

Please SPECIFY BAR HEIGHT in the comments field AT CHECKOUT
***USB Outlet, Harness and 1" Ball Mount sold separately.***